Inverter 10KW 380V HYBRID DEYE HP3 HV
Product details
The SUN-10K-SG01LP3-EU inverter allows you to combine the production of solar panels with the electrical grid and batteries, so it acts as an intelligent energy manager that prioritizes the consumption of the photovoltaic installation and guarantees that the home has an energy supply always either from solar panels or from the electrical grid. In addition, the SUN-10K-SG01LP3-EU inverter can be connected to batteries that work between 160V-700V to store the surplus energy produced by the solar panels and have energy autonomy also on days with less solar radiation and night hours, so reduces dependence on the electrical grid, that is, the SUN-10K-SG01LP3-EU combines grid, direct energy from solar panels and batteries, becoming a very efficient manager for self-consumption installations.
Deye hybrid inverters have a “smart load” output that can be configured to divert surpluses to consumption in order to take full advantage of solar production. For example, with the default configuration, the smart load output is energized and supplies consumption when the battery is between 100 and 95% and the solar production is greater than 100w.
2.Technical Data
Battery Input Data
· Battery Type: Lithium-ion
· Battery Voltage Range(V): 160-700
· Max.Charging Current(A): 37
· Max.Discharging Current(A): 37
· Charging Strategy for Li-ion Battery: Self-adaptation to BMS
· Number of battery input: 1
PV String Input Data
· Max DC Input Power（W): 15600
· Max DC Input Voltage（V): 1000
· Start-up Voltage（V): 180
· MPPT Voltage Range（V） 150-850
· Rated DC Input Voltage(V) 600
· Max Input Short-Circuit Current（A): 39+30
· Max Operating PV Input Current（A): 26+20
· No.of MPP Trackers/No.of String Per MPP Tracker: 2/2+1
AC Input/Output Data
· Rated AC Input/Output Active Power（W): 12000
· Max AC Input/Output Apparent Power（VA): 13200
· Peak Power (off-grid)（W): 1.5 times of rated power,10s
· Rated AC Input/Output Current（A): 18.2/17.4
· Max AC Input/Output Current（A): 20/19.2
· Max Continuous AC Passthrough (grid to load)（A): 80
· Rated Input/Output Voltage/Range(V): 220/380V，230/400V 0.85Un-1.1Un
· Grid Connection Form: 3L+N+PE
· Rated Input/Output Grid Frequency/Range: 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz
· Power Factor Adjustment Range: 0.8 leading to 0.8 lagging
· Total Current Harmonic Distortion THDi: <3% (of nominal power)
· DC Injection Current: <0.5%ln
Efficiency
· Max Efficiency 97.6%
· Euro Efficiency 97.0%
· MPPT Efficiency＞99%
Equipment Protection
· Integrated: DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection,
AC Output Overvoltage Protection, AC Output Short Circuit Protection, DC Component Monitoring,
Overvoltage Load Drop Protection, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (optional),
Power Network Monitoring, Island Protection Monitoring, Earth Fault Detection, DC Input Switch,
DC Terminal Insulation Impedance Monitoring, Residual Current (RCD) Detection, Surge protection level
· Surge Protection Level: TYPE II(DC),TYPE II(AC)
Interface
· Communication Interface: RS485/RS232/CAN
· Monitor Mode: GPRS/WIFI/Bluetooth/4G/LAN (optional)
General Data
· Operating Temperature Range: -40 to +60℃, >45℃ Derating
· Permissible Ambient Humidity 0-100%
· Permissible Altitude 2000m
· Noise ≤ 55 dB(A)
· Ingress Protection(IP) Rating IP 65
· Inverter Topology Non-Isolated
· Over Voltage Category OVC II(DC),OVC III(AC)
· Cabinet size（W*H*D）[mm] 440*680*260（Excluding connectors and brackets）
· Weight[kg] 30.5
· Warranty: 10 Years
the Warranty Period Depends the Final Installation Site of Inverter, More Info Please Refer to Warranty Policy
· Type Of Cooling: Intelligent air cooling
· Grid Regulation: IEC 61727,IEC 62116,CEI 0-21,EN 50549，NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G99,VDE-AR-N 4105
· Safety EMC/Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
Operation
Traditionally, in isolated solar installations, the inverter generates an alternating current network and acts as the network manager. Control the flow of energy between the grid and the batteries.
Back Up Mode:
This type of system is designed for places where the network goes down frequently and for a long time; When this happens, the hybrid inverter operates connected to the alternating grid in order to guarantee an energy source, the inverter is dedicated to keeping the batteries charged during times when there is a grid, and when it drops, the inverter takes the energy. of the batteries in order to be able to get through the hours when the network is out.
Self-consumption mode:
This is the way we will usually use this inverter, it is about consuming the energy directly from the panels while we have sun at that moment, in the event that the panels produce more energy than we are consuming, these are used to charge the batteries , in order to be used during night hours.
Sell mode:
Inverter allows you to sell energy from solar panels or batteries to an electric company, you can program the power you want to sell and the time you want to sell both at night or by day. At the same time you can buy electric light from this electric company by day or at night and power What do you want to buy?
Packaging
